Replace Lock in UPVC Door
A professional locksmith should be contacted for your upvc door locks if they aren't working correctly. They are quick, efficient, and will complete the task to the highest standards.
It's not that difficult to replace the bar lock made of upvc. It's not difficult to change a barrel made of upvc lock.
Eliminating the Barrel Lock
uPVC doors and windows are popular in a variety of homes. They are great for allowing natural light into the home and are simple to open with the correct key. The process of changing the barrel on a uPVC door is a straightforward task that takes only five minutes. If you have lost your keys, a tenant has left but has not returned them or the barrel of your lock has been damaged it is a simple solution.
The first thing to do is to remove the screws that hold the handles. The handles will be removed of the way so that you can access the barrel screws for the lock. Be careful not to loosen the screws too quickly since this could damage the handles or cause them to fall off while working.
After the screws have been removed, look for the screw that holds the barrel lock in position on the inside of your door. This screw is different in color from the other screws on your door and sticks out. With the Phillips screwdriver, remove this screw. Take the key that you use to unlock the lock and place it inside the barrel. Then, turn it to the right as far as you can. This should release the barrel and make it easier to pull it out of the door.
Now that you have loosened the screw and you're ready to break the pins holding the euro cylinder in place. You'll require a pair of strong pliers, or mole grips to do this. Grab the protruding end of the euro cylinder and bend it from side to side and upwards and downwards. This will break the two support pins that hold it in place.
Installing the new cylinder can be done after the old one is removed. To ensure you purchase the correct replacement, first determine the cylinder's size. This can be done by measuring the distance from the center of the circular part of the keyhole to the center of the square spindle. The measurement should be taken from the top of the spindle hole.
Change the Cylinder
The euro cylinder is the main locking mechanism of doors made of upvc. repair window locks upvc is easy to change and don't need the services of a locksmith or handyman. If yours does not have this security feature, you must replace it with one that does. These are very inexpensive and will save you money and inconvenience if your locks have been damaged by these security threats.
To begin, open the door and stand in front of it, so that you can reach the screw that holds the handle using your hands or an appropriate tool. Then loosen it a bit perhaps a quarter turn to begin the process.
The cylinder should now be easy to remove since the screw will stop holding it in place. Next, you will need to determine what size replacement cylinder you require. There are about 25 different sizes to choose from. It is a good idea to take the old cylinder with you when you buy a new one, so that you can be sure it will fit.
If you're not sure of the size, measure from the center of the screw hole to the end of cylinder. This is the only way to be sure you're getting the correct size cylinder for your upvc doors.
When you have your new cylinder, place it into your door reverse to the way you took out the old one. It may be a little difficult to align the lock cam, but this is usually just an issue with alignment and will eventually be sorted out.
Now you must screw the long securing screw back into position. After this, you can test it to make sure that the cylinder is secure within the door. It is now time to attach the handle back to the door and test it again. If all is good, the cylinder lock on your upvc door has been changed and you should have added an additional layer of security to your home.
Change the Handle
There are several reasons why the door handle or door knob may become loose. It could be due to wear and tear on the handle or it can be caused by the square spindle in the handle becoming worn or damaged by the force or use. In this scenario the door handle has to be replaced.
It is first important to make sure the door is propped open and won't close when you are removing and replacing the handle. Then remove the screws from the inner surface of the plate with the screwdriver. This will remove the handle from the plate. Do not lose the screws, as you will need to tighten them again later.
It is now possible to remove the handles to access the cylinder lock within the door. It will be a round or bulb shaped cylinder that is only found in multi-point locks used on upvc doors and some doors made of aluminum. The procedure of changing the cylinder is similar to that of changing the handle, except you'll need to remove the old cylinder from the door and replace it with a brand new one.
It is crucial to take into consideration the size of a replacement handle when choosing one. The handle should be the same size as the original since it will need to be able to fit the existing screws holding the handle in place. You can start by consulting the table of sizes that lists the most common sizes of replacement handle plates as well as their keyhole centers.
Consider upgrading your door handles made of upvc to a higher security standard such as a Sold Secure SS301 set or 2* Kitemark security handles. This will improve the security of your home and making it easier to operate the door. These sets are a bit more expensive, but the added security and peace mind is worth it. To constantly push the door handle up and down in order to shut or open it is not something you would like to be doing.
Change the Lock
The security of your uPVC lock could be a weak point for burglars. Upgrade your uPVC to multipoint locking to ensure it's secure. This could include a deadbolt and an open hook to keep out criminals. A professional locksmith can help you with this, however it is also possible to do the work yourself. The process is quick and easy. You will only need just a few tools.
The first step is to loosen the screws that hold in the handle. With a screwdriver, you can remove the screws and put them in a safe place. You can then raise the handle and expose the screw that holds the cylinder in position. The screw can be removed and replaced with a brand new one. Make sure the screw is of the same size as the original. It should align properly with the lock barrel.
Making changes to the lock of your uPVC is a daunting task. It is vital to the security of your home. If you make a mistake, it could leave you unable to unlock the door. If you know how, it's relatively easy and costs less than contacting professional locksmiths.
You'll need to remove the inner faceplate from the lock to switch the lock. You'll need to look for the screws inside the door, and the retaining bolt outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
There are several reasons why you may have to change the lock on your uPVC doors. It is possible to replace the lock on your uPVC door due to a number of reasons.
Anyone with basic DIY skills can replace the mechanism of a uPVC lock. If the lock is stuck, you will have to examine the hinges in the mechanism. If the hinges are lubricated it is likely to be a simple repair. If you aren't confident doing this, it's best to call a professional.